Creative Business Card

Business cards can also be printed with a digital copier, which uses toner baked onto the surface of the card. Some industry leaders have begun to avoid using the term "copier" in their literature, insisting their state-of-the-art machines are more like digital presses, than their office-oriented predecessors.
While some of the older office copiers may have had problems running heavy business card stock, the newest digital presses can print on stock as heavy as 80# to 100# cover stock, and 12 to 14 point stocks with ease.
UV coats, and other coatings such as Aqueous Coatings are used to speed manufacturing of the cards. Cards that are not dry will "offset" which means the ink from the front of one card will end up on the back of the next one. UV coatings are generally highly glossy but are more likely to fingerprint, while aqueous coatings are not noticeable but increase the life of the card. It is possible to use a dull aqueous coating on uncoated stock and get some very durable uncoated cards, and using UV coating or plastic lamination can also be applied to thicken thin stocked cards and make them more durable as well.
When cards are designed, they are given bleeds if color extends to the edge of the finished cut size. (A bleed is the extension of printed lines or colors beyond the line where the paper it is printed on will be cut.) This is to help ensure that the paper will cut without white edges due to very small differences in where the blade cuts the cards, and it is almost impossible to cut the cards properly without. Just being a hair off can result in white lines, and the blade itself will pull the paper while cutting. The image on the paper can also shift from page to page which is called a bounce, which is generally off by a hairline on an offset press, but can be quite large on lower end equipment such as a copier or a duplicator press. Bleeds are typically an extra 3.175 (1⁄8) to 6.35 mm (1⁄4 in) to all sides of the card.