Girl With Beer

• Draught
Draught beer from a pressurised keg is the most common method of dispensing in bars around the world. A metal keg is pressurised with carbon dioxide (CO2) gas which drives the beer to the dispensing tap or faucet. Some beers may be served with a nitrogen/carbon dioxide mixture. Nitrogen produces fine bubbles, resulting in a dense head and a creamy mouthfeel. Some types of beer can also be found in smaller, disposable kegs called beer balls.
In the 1980s, Guinness introduced the beer widget, a nitrogen-pressurised ball inside a can which creates a dense, tight head, similar to beer served from a nitrogen system. The words draft and draught can be used as marketing terms to describe canned or bottled beers containing a beer widget, or which are cold-filtered rather than pasteurised.
Cask-conditioned ales (or cask ales) are unfiltered and unpasteurised beers. These beers are termed "real ale" by the CAMRA organisation. Typically, when a cask arrives in a pub, it is placed horizontally on a frame called a "stillage" which is designed to hold it steady and at the right angle, and then allowed to cool to cellar temperature (typically between 11–13 °C / 52–55 °F), before being tapped and vented—a tap is driven through a (usually rubber) bung at the bottom of one end, and a hard spile or other implement is used to open a hole in the side of the cask, which is now uppermost. The act of stillaging and then venting a beer in this manner typically disturbs all the sediment, so it must be left for a suitable period to "drop" (clear) again, as well as to fully condition—this period can take anywhere from several hours to several days. At this point the beer is ready to sell, either being pulled through a beer line with a hand pump, or simply being "gravity-fed" directly into the glass.